This cylinder throwing tool is designed for use when fitting locks that take a cylinder. The lock can be operated with this product by simply inserting it and turning when the cylinder is not yet fitted, it is suitable for both Oval and Euro profile cylinder locks.
The ASEC Combined Magic Wand is a 2 in 1 spreader and breaker bar, conveniently combined for ease of use, and is suitable for use on doors and windows. The cylinder snapper is suitable for use on Euro cylinders.
The Sashmate Top Hung Rolling Bar Fitting Tool is designed to assist with fitting a top hung window sash, and is an accessory to the Sashmate Window Removal tool (L18701 & L18702). The range is constructed from premium quality zinc plated steel and manufactured in the UK.
The Sashmate Top Hung Drop Set Fitting Tool can be used to independently support each side of the sash when fitting a top hung window sash in rare circumstances where the horizontal bracing arms of the Sashmate® Top Hung do not lower sufficiently enough to go under the bottom of the sash when the sash has been opened to its maximum. This situation can occur because incorrect hardware was used to install the window, such as the wrong type or position of friction stays. It can also be caused by twisted or collapsed friction stays, which will cause one side of the window to hang lower than the other. This product is an accessory to the Sashmate Window Removal tool (L18701 & L18702).
This package of 2 x Sashmate telescopic rod sets are designed to be used instead of standard solid rods allowing the Sashmate® Top Hung to be used with short complete openers of approximately 650mm in height. Rod set 1 = 650mm to 880mm and rod set #2 = 880mm to 1240mm. These telescopic main rods can also be combined with the Sashmate Side Hung to reduce minimum working height to 650mm.
The Sashmate Top Hung Package contains the tools required for easy repair and replacement of top hung window sashes. The range is constructed from premium quality zinc plated steel and manufactured in the UK. An added bonus of using Sashmate products is that using extra sets on a repair increases the load capabilities of the sets, So, for example, if 2 Sashmate Top Hung sets are used, this makes double the maximum working load capability. Kit Contents: - 1 x Sashmate Top Hung Steel - 1 x Top Hung Drop Set Steel - 1 x Top Hung Rolling Bar Steel - 1 x Top Hung Storage Bag
The Sashmate Main Tool Package contains the two main fitting tools required for window sashes, the Sashmate top hung steel and side hung steel sets, plus storage/carry bags. The range is constructed from premium quality zinc plated steel and manufactured in the UK. An added bonus of using Sashmate products is that using extra sets on a repair increases the load capabilities of the sets. For example, if 2 Sashmate Top Hung sets are used, this makes double the maximum working load capability.
Standard sash balance foot from Era to suit D type sash balances on vertical sliding sash windows. It is supplied with screws, for use on sashes without horns.
This tension adjustment tool is designed for use with D Type sash balances. These types of balances are supplied non-tensioned, and this tool can be used to adjust the balance within its weight range to suit actual glazed sash weights. This handheld tool is easily portable for quick on-site adjustments.
This installation tool from Era is designed for use with F & K style sash balances on vertical sliding sash windows to help with installation and adjustment on unequal or heavy sashes.
This adjustment tool from Era is a useful addition to any toolbox, featuring a magnetic 6.5mm bit driver with a flexible shaft, making it ideal for completing jobs in hard-to-reach areas. It is recommended by Era for making on-site adjustments to sash window balances and has a soft grip handle.